Structural

Design of Dog-Legged Staircase

Design of Dog-Legged Staircase

A stair is a set of steps leading from one floor to the other. It is provided to afford the means of ascent and descent between various floors of the building. The room or enclosure of the building, in which the stair is located, is known as staircase. The opening or space occupied by the stair is known as a stairway. In a domestic building the stairs should be centrally located to provide easy access to all rooms. In public buildings, stairs should be located near the entrance. Stairs may be constructed by timber, bricks, stone, steel or reinforced cement concrete. Staircases provide access and communication between floors in multi-storey buildings, and are a path by which fire can spread from one floor to another. Staircase, therefore, must be enclosed by fire resisting walls, floors, ceiling and doors. It is desirable that the linings to the walls and the ceilings are non- combustible and of low flame spread. Another important aspect in the design of stairs is the strength aspect. It must be designed to carry certain loads, which are similar to those used for the design of floor.

STAIRS AND ITS TYPES

Single flight straight stairs

Double flight straight stairs

Quarter turn newel

Half turn newel

Open wall stairs

Dog legged stairs

Bifurcated stairs

Circular stairs

Spiral stair

STAIRS OF DIFFERENT MATERIALS

TIMBER STAIRS: these stairs are light in weight and easy to construct, but they have very poor fire resistance. They are used only for small rise residential buildings. Sometimes, fire resisting hard wood of proper thickness may be used.

STONE STAIRS: these are widely used at places where ashlar stone is readily available. Stone stairs are quite strong and rigid, though they are very heavy. Stone used for construction of stairs should be hard, strong and resistant to wear. The simplest form of stone stairs is those supported on both the ends, though an open well stair case can also be built.

BRICK STAIRS: these are not very common, except at the entrance. However, brick stairs of single straight flight are often made in village houses. The stairs consist of either solid wall, or also, arched openings may be left for obtaining storage space.

METAL STAIRS: stairs of mild steel or cast iron are used only as emergency stairs. They are not common in residential and public buildings, though they are strong and fire resistant. These are commonly used in factories, godowns, workshops, etc.

R.C.C: these are the stairs widely used for residential, public and industrial buildings. They are strong, hard wearing and fire resisting. These are usually cast- in – situ and a wide variety of finishes can be used on these.

Design of Dog-Legged Staircase

Dog legged stairs are the stairs in which the user climbs up to a flight turns at one eighty degree n then climb stairs in opposite direction

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
Follow Engineers

Civil Engineering Job Update in WhatsApp

click on the below link to join
Follow Now
close-link
error: Alert: Content selection is disabled!!
World’s Biggest Cruise Ship Construction Work Checklist Autocad 2d Plan with 3d Elevation