FREE STRUCTURAL SOFTWARE
|Software||Rating||Where to get|
2D and 3D linear elastic frame analysis. Completely free, 32-bit
is a powerful 32 bit mechanism analysis program for single andmulti-span
masonry arch bridges. A unique feature is its ability to analysemulti-ring
brickwork arch bridges. Developed at the University of Sheffield, UK.
|FastFrame by Enercalc.|
This is a 32 bit Windows 95, 98 & NT Two-Dimensional frame analysis program. You can model any type of framed 2D structure by setting “joints” and specifying “members” that span between them. After loads and load cases are specified the displacements and forces are calculated by solving a bandwidth minimized stiffness matrix using an
(This would have been a 5-star but for the
|Fastrak Simple Beam|
Analysis and design of simple steel beams and cantilevers to BS
Free composite and non-composite simple steel beam design to BS 5950 from
This is on the Corus Contruction Manual CD, request it
Engineering Analysis Software written by Herbert G. Whitman, PE. Many free programs here!
English and SI units.
|CONCEPT by Reinforced|
Conceptual design program for RC framed buildings.Get this on the RCC-2000 CD.
Free beam analysis program.
3D Beam/Truss Finite Element Program.
|MicroBEAM 4.10 is the structural analysis and design tool for engineers. It|
originally works in DOS world and now in Windows 3.1/95/98. Free. Also
available here is a pile group analysis program and a section properties
analysis program, both free.MicroBeam is not BS8110.
A free program for the analysis of plane frames. A DOS program which works
|CADRE Lite 2.1 Cadre Lite|
is a 32 bit program for solving 3-D frame and beam type structures by the
finite element method.
A free, program to assist in selecting soil density and calculating phase
|Sphygmic Software Spreadsheet|
Free Excel-compatible spreadsheet program with over 100 functions.
|MathGV (32-bit) is a powerful, free program for graphing mathematical functions.||*****||http://www.mathgv.com|
|L I S A is a|
professional finite element analysis program courtesy of Joachim
The downloadable version is limited to a generous 1300 nodes, and has very powerful Modelling Tools. It can be used to analyze Linear Static Stresses, Eigenvalues and Eigenvectors in dynamic analysis.
|SLFFEA is a free|
finite element analysis program which can be used by students as a learning tool for FEM programming or by practicing engineers. This program allows for non-zero boundary conditions and has skyline storage of the stiffness matrix.
– free beam analysis program for Windows 95 and above.
|Rectangular Beam Design|
is a free rectangular beam design program to BS8110. Windows 95 and above.
|Geotechnical Software Directory|
– Free geotechnical software here. Click on
the Freeware heading in the index.
|ConSpec from the|
Ready-mixed Concrete Bureau- a software tool to assist in the specification of concrete for construction projects. The aim is to produce specifications which are both concise and complete.
|FBEAM from Fabsec.|
Free software for the design of fabricated composite and non-composite
steel beams (with web openings) to BS5950. Produced by the Steel
Construction Institute. You
can make up your own beam using the custom function. Request
a FBEAM CD from Fabsec’s web site.
|freeCAD is an introductory 3D Computer Aided|
Design package with Motion Simulation capabilities. It allows you to create and manipulate collections of 3D
parts. The parts are 3D solid models, which can be connected or assembled by joints or constraints. The parts and their connections define the structure or mechanism that the assembly
|CONVERT is an easy to use unit conversion program that will convert the most popular units of distance, temperature, volume, time, speed, mass, power, density, pressure, energy and many others, including the ability to create custom|
|Uconeer – Units Conversion for Engineers. This is a powerful, but easy to use, units conversion tool created specifically for engineers. It includes 370 units in 42|
|Rockgrout – a free|
suite of programs about cement grouting in rock foundations for dams and
other heavy engineering structures by A Clive Houlsby, Grouting Engineer
|Slope/W Student edition|
– free slope stability analysis software.
|Curvefit v2.11-A – Fits your data to one of 25 formulasand show you the best fit.|
|Winfit – non linear|
least squares fitting program for windows 3.x. RequiresVBRUN100.DLL
in the /windows directory.
|COMPACT is a suite of computer-aided learning programs covering 11 topics on concrete technology and the design of concrete structures to EC2, where appropriate.|
Several of the modules, particularly on reinforced concrete design, will also appeal to
engineers wishing to familiarise themselves with EC2. Free download.
|Structural Analysis FEM|
Software – free Java Software that be tested online. Some can be
downloaded to run on your computer. 3D FEM Package, 2D FEM Package, Beam
Torsion Analyser, Truss Analyser, Vibrations Plotter, Graph Plotter.
|MARC/Designer – A|
completely free, fully functional finite element analysis software
courtesy MARC Analysis and Research Corp limited to 500 nodes. Can be used
for Linear static stress, buckling analysis, steady state heat transfer
and modal analysis. It has an excellent tutorial. @5MB
|Graphmatica – is a powerful, easy-to-use, equation plotter with numerical and calculus features. Graph Cartesian functions, relations, and inequalities, plus polar, parametric, and ordinary differential equations.||?||http://www8.pair.com/ksoft/|
|BeamBoy Beam Analysis Tool|
is a utility for calculating engineering stress and deflection in structural beams and shafts.
BeamBoy is freeware.
|Solution of 2-Dimensional Trusses|
and 3-Dimensional Trusses – Two QBasic programs. Tensile &
compressive forces and reactions are output. The global stiffness matrix is displayed in these programs.
Also a Wireframe Modelling program with source code. Free.
|WStrudl’s WinBeam –|
is a free, continuous beam analysis program. It is in the WStrudl DEMO but
is independent to WinSTRUDL. Download and install the WStrudl demo, run the WMaster.exe and click on the Beam icon.
|Truss Master Analysis|
Program – Single form interface, input generators, deflection
animation, pan & zoom functions. Free, postware.
|Beamax is an application for graphically creating, editing and analysing continuous beams.|
The program supports an Automation interface which allows to run the analysis in other applications like Microsoft Excel or Visual
Basic – Free.
|Femax is a component system that provides functionality for structural analysis using the Finite Element Method (FEM). The system defines interfaces for nodes, degrees of freedom|
(DOF), matrices, vectors, models and elements. The Component Object Model (COM) is used for object linking. All components support an Automation interface for integration using the Visual Basic for Applications (VBA) environment.
|CALSD “Educational Structural Engineering Program” has been developed at the University of California, San Diego, to support teaching and learning of structural engineering concepts and techniques.|
CALSD provides functionality for three-dimensional linear elastic static and dynamic analysis.
The system has been enhanced with a Windows 95/98/NT user interface.
Freeware bars calculator from Alashki Engineering Solutions.
|DDA for Windows – a|
free Windows program to perform discontinuous deformation analysis. Manual
is available online.
|ALP99 – Axially|
loaded pile, elastic pile supported by elasto-plastic springs.LLP99 – Laterally loaded pile, beam on elasto-plastic springs.
SOILMECH – A summary of
SPW2001 – Sheet pile wall analysis, beam on elasto-plastic springs,
STB2001 – Slope stability by Bishop’s method, student edition
Winkler – Beam on elastic foundation.
Free programs from the Geotechnical Laboratory of
|QSection – free|
Windows program for computing the section properties of arbitrary sections.
Edition (ELastic PLAte) – Analysis and design of slab foundations.
The reinforcement of slab can be carried out by one of the following design codes:
ACI, EC 2, DIN 1045 and ECP.
The ELPLA limit edition allows users to easily create projects for analysis and design slab floor or raft foundation. It includes all functions of the ELPLA standard edition except that the node number is limited to 200 nodes.
|Portal Frame Analysis|
for MS Windows v3.x/95/98 – Portal Frame Analysis to BS449, works out
moments, reactions, stresses and the approximate section sizes required
for a given span of a steel portal frame.
|Frame – Free software for static and dynamic structural analysis of 2D and 3D linear elastic frames and trusses.|
Computes the static deflections, reactions, internal element forces, natural
frequencies, mode shapes and modal participation factors of two-and three- dimensional elastic structures using direct stiffness
and mass assembly. From Duke University North Carolina.
2002 is a continuous beam software package that allows the user to
solve statically indeterminate beam structures. Defining multiple span
elements of varying elasticity’s with uniform, distributed and
concentrated loading applications along with a variety of support
conditions is easily at the hands of the user.Note.
Although the package is described as a demo I can’t see any limitations on
it’s use. Also there appears to be no requirements to register.
|FREE CAD SOFTWARE|
2000 by CADopia (base product) is a full 2D CAD program and is
available for free. IntelliCAD’s native file format is .DWG. It allows you
to open any existing Autodesk AutoCAD file (V2.5 through 2000) and there
is no file conversion or data loss.
|Volo View Express by|
Free application that lets you display and print AutoCAD® drawings without AutoCAD software. You can exchange information with everyone involved in your project or on your design team, independent of a
v 4 Learning Edition, is a comprehensive, fully functional 2D CAD
software product. It is the ideal vehicle for new users to learn how to
use and discover the concepts behind CAD software. In addition it is a
viable product for producing professional 2D CAD drawings. Free
6.5 for Windows – This is a
re-release of CADVANCE Version 6.5, a CAD software system designed for
Windows 3.1, but yet also runs on Windows 95/98 and NT. Originally
released in 1995 at a suggested retail price of $1950, it is now available
to anyone free of charge for the software. This is not a demo, but a
full working version.
|QCad is a free|
open-source 2D CAD system for Linux, various Unices and Windows. The
developers main goals are to build a stable, fast and easy to use CAD for
everyone. One doesn’t need any knowledge of a CAD program to start working
Free 2-D CAD program.
|MINOS v. 2.1|
Minos is a free, full 3D Solid CAD System.
|SoftCAD.3D® Lite Version 1.16|
for FREE!Practical-use software for easy creation of three- dimensional models.
|Solid Edge Origin is a FREE, limited-function version of our complete Solid Edge software. It includes 3D modeling of basic parts, a complete 2D drafting system, import and export of 2D CAD data and tutorials.||?||http://www.solid-edge.co.uk/home1.htm|
Lite – creates 3D models, walk-throughs and renderings, from
sketch to presentation, for home design and visualization of architecture,
landscapes, exhibits, or any spatial design projects. Free 3D
|VARKON – a free CAD|
system and high level development tool for Engineering, Computer
Aided Design and Product Modeling applications.
|Thinking 2D – free|
2D CAD program.
|WHIP!® Viewer from|
Autodesk allows you to quickly and easily distribute design files over a
network without AutoCAD® software. It boosts collaboration and
information exchange among project members, and it’s available for
download free of charge.
|Drawing QuickViewerprovides integrated “quick viewing” of AutoCAD|
drawing files from the Windows File Explorer. Freeware.
|DWG Viewer 3.0 –|
Free DWG/DXF/DWF Viewer.
|Power Tools for AutoCADoffers you basic freeware tools for AutoCAD 2000, organized in a clear menu.||****||http://www.winsite.com/bin/|
|DESI-III is a powerful and|
user friendly 2D CAD system with a lot of professional features: associative hatching, dimensioning, associative text attributes to lines and symbols, multiple (up to hundreds) lines or line chains and curves. Automatic interruption of lines on user definable boundaries of symbols AND repairing if the symbols is moved or deleted. Adaptive and powerfull line pattern definitions, macro’s etc. etc.
|OttoPDF is a freeware program that converts AutoCAD drawing files into Adobe Acrobat PDF files without using AutoCAD.||?||http://www.myndkryme.com/products/|
|OttoTiff is a|
conversion utility that takes AutoCAD DWG files and converts them to TIFF
Group IV image files. Freeware.
Steel Sections available in .DWG format.
|Free USA Engineering Software|
|WSDOT Bridge Engineering Software|
Free programs from the Washington State Department of Transportation.
|Office of Earthquake Engineering|
SoftwareFree California Transportation Department software for bridge foundations,
piles and concrete sections.
|Expansion Joint Spacing Design|
|Aladdin – A computational toolkit for the interactive matrix and finite element analysis of large engineering structures, particularly building and highway bridge structures.||http://www.isr.umd.edu/~austin/aladdin.html|
|Pavement-Transportation Computer Assisted Structural Engineering – Distribution site for free airfield, road, railroad, and general transportation, design and evaluation software written by US Army Corps of Engineers||http://www.pcase.com/|
|FElt is a free system for finite element analysis.|
The current version of FElt knows how to solve linear static and dynamic structural and thermal analysis
|Structural Engineering Programs|
–free from the Florida Department of Transportation.
|Bridge Software Institute|
– University of Florida, bridge software.
|IDARC – A Computer Program for Inelastic Structural Analysis developed at the State University of New York at Buffalo.|
The program is distributed free.
|Concrete Column Program|
– This highly powerful program is an essential tool for designing concrete
columns in a Professional Engineering office. The Program can handle
UniAxial, BiAxial design of Circular, Rectangular and ANY SHAPE (Irregular
Shape defined by X,Y Coordinates) Columns.
|ConcBeam – reinforced|
concrete beam “calculator”. User enters Bending Moment and Shear, the program generates reinforcement required in text and graphical formats.
Working Stress, Load Factor and Load and Resistance, AASHTO or ACI requirements.
English and Metric units. Free.
|97 UBC Lateral Design|
Spreadsheet – this spreadsheet is intended as an educational tool for the learning and understanding of the Wood provisions of the 1997 Uniform Building Code. It will perform both flexible and rigid diaphragm analysis.
Requires Microsoft Excel. Free.
|Two-cycle Moment Distribution –|
– this Excel spreadsheet performs two-cycle moment distribution per the PCA publication of the same name. It designs positive and negative moment reinforcement, stirrups, checks deflection, accounts for column stiffness and performs crack control analysis.
|StlShape – is a|
free program for the analysis and design of simply supported beams and
cantilevers. The program can cater for steel, timber and reinforced
concrete to American building codes.
|Bridge Application Software|
– free from the Colorado DOT Information Systems, Project Engineering
Customer Support Unit.
|Excel spreadsheet to|
analyse freestanding signs. Free download from “Engineering Sign Structures”.
|The BridgeSight Shear|
Designer – Free shear design aid for reinforced concrete beams. AASHTO LRFD
design. Microsoft Excel version 7.0 or later.
– for calculating lateral soil pressures on a retaining wall using the Rankine
method, area of steel for a concrete T-Beam given the design moment and
properties of any general section. Free.
|NONLIN – Nonlinear|
dynamic time history analysis of single degree of freedom systems.
Microsoft Windows based application for the dynamic analysis of single
degree of freedom structural systems.
|Concrete Building Designby Computer|
– free software with explanations and illustrations covering the analysis and design of concrete building structural components.
|Mathcad Application Files– A free collection of Mathcad applications on the official Mathcad web site. Includes a section on Civil Engineering.||http://www.mathsoft.com/appsindex.html|
|From The Structuralist|
Net – Flexible diaphragm shear distribution Excel spreadsheet,
Wide-flange steel beam analysis spreadsheet and an Excel macro to extract
line coordinates from Autocad Drawings. Free downloads.
|MathCad Templates –|
many Mathcad template files for structural engineers on the The
Mathcad Templates – free downloads from the Mathcad Collaboratory.
Engineering Software – Free software from the Office of Bridge
Technology, Federal Highway Administration, United States Department of Transportation.
|DTColumn – this|
program quickly and easily calculates reinforced concrete column
interaction diagrams. It is a FREE download to anyone interested in using
|Plane Failure Analysis –|
calculates the factor of safety for plane failures in rock and soil slopes where defined discontinuity planes exist.
Free from the Southern Illinois University.
|Wedge Failure Analysis|
– includes a stereonet view of the planes the user inputs and a printable summary of the analysis. The user can input artifical support
(rockbolts, cables, bolts) or calculate the required support by entering the desired factor of safety.
Free from the Southern Illinois University.
|IDARC-BRIDGE – A|
Program for Three-Dimensional Nonlinear Inelastic Analysis of Bridges.
Allows many aspects of bridge behavior to be explicitly modeled.
Developed at the State University of New York at Buffalo.
The program is distributed free.
is a utility containing shape information for W, S, M and HP sections.
Basic mechanical and geometrical properties are shown and its based on
ASTM A6 as it was current in 2000. Freeware.
|Rest Of The World – Free Engineering Software|
|3D Pile Analysis and|
Cross-section – 2 free analysis programs in Dutch.
|SpanCAD is software for|
the design of structural reinforced concrete walls, discontinuities, deep beams, walls loaded in plane
and box-shaped structures.
|Structural Safety –|
this program computes the reliability of a structure from the safety factors that are
used in its design. It is freeware, so, you can download and use it free of charge.
|Raul Canle’s Structural Engineering|
page – has some small programs for purlin, stiffeners and plate girder calculations
to USA and Spanish codes available for download (in Spanish).
|IFB (Integrated Floor Beams)|
-The IFB program has been developed for the design of slimfloor slabs based on Integrated Floor Beams
(IFB) sections, which are composed of a frame with a split-up wide flange section and a plate welded as bottom or top flange. It is only possible to calculate simple beams that are hung at the two supports.
|AFCC – The AFCC program calculates the ultimate loads for composite columns AF 30/120 at room temperature according to EUROCODE 4, part 1.1|
(ENV 1944.1-1) and for the ISO fire classes R30, R60, R90 and R120, in accordance with EUROCODE 4, part 1.2
|AFCB – The AFCB|
program calculates the ultimate bending moments for composite beams at
room temperature according to EUROCODE 4, part 1.1 (ENV 1944.1-1) and for
the ISO fire classes R30, R60, R90 and R120, in accordance with EUROCODE
4, part 1.2 (ENV 1944,1.2).
Steel Sections Technical Data in Excel format from the Europrofil sales
|Response-2000 is an easy to use sectional analysis program that will calculate the strength and ductility of a reinforced concrete cross-section subjected to shear, moment, and axial load. All three loads are considered simultaneously to find the full load-deformation response using the latest research based on the modified compression field theory. The program was developed at the University of Toronto.||http://www.ecf.utoronto.ca/~bentz/r2k.htm|
|Membrane-2000 is an easy to use analysis program that will calculate the load-deformation relationship for a uniform panel of reinforced concrete subjected to in-plane shear loading. The program implements the Modified Compression Field Theory as well as the Rotating Angle-Softened Truss Model and the Fixed Angle-Softened Truss Models. The program was developed at the University of Toronto.||http://www.ecf.utoronto.ca/~bentz/m2k.htm|
|Shell-2000 is an easy to use analysis program that will calculate the load-deformation relationship for a general plate or shell subjected to any combination of the 8 loads that are possible for such an element. Shell-2000 is the first program to properly account for the out-of-plane shear distribution in a rigorous way. The program implements the Modified Compression Field Theory to arrive at solutions. The program was developed at the University of Toronto.||http://www.ecf.utoronto.ca/~bentz/s2k.htm|
|Triax-2000 is an easy to use analysis program that will calculate the load-deformation relationship for a uniform block of reinforced concrete in three dimensions. It may be subjected to any combination of the general 6 stresses that can be applied to an arbitrary 3D block. The program implements the Modified Compression Field Theory to arrive at solutions. The program was developed at the University of Toronto.||http://www.ecf.utoronto.ca/~bentz/t2k.htm|
|Multiple Fastener Connections (WIN/UK/free)|
– Developed for the research project ‘double shear timber connections with dowel type fasteners’, by
Dr.Ir. Andre Jorissen. With the MFJ program the reduction in the load carrying capacity for multiple fastener connections can be simulated for a variable number of fasteners, depending on the geometry and material properties.
|Timber Frame Housing|
– Developed for the Nordic Timber Council and distributed amongst architects, technical schools and consumers in the Netherlands on quite a large scale. The program shows you the main principles of detailing and construction for this building method.
|Dutch Glulam Design Program|
– With the glulam design program it is easy to design laminated timber constructions quickly and accurately. The program has been designed to be used by structural engineers as well as architects. The program calculates and optimizes the required dimensions, and outputs the moments, shear forces and displacements on either screen or printer.
|Timber Poles Program|
(DOS/NL/free) – Program for the design and calculation of foundations with timber poles.
You can download and use the program for free.
|Analysis of a|
Reinforced Concrete Section – free spreadsheet for the new Australian Standards Concrete Structures and Bridge Design Codes.
Calculate stresses under combined bending & axial load, minimum reinforcement areas,
crack widths to BS5400 & EuroCode2, ultimate moment capacity for specified axial load,
display moment/axial load interaction diagram.
European beams selection program. The aim of the program is to give the
user a fast method to find a steel beam and its associated properties.
This can be done by selecting a profile by its name or by searching a
profile responding to a set of user-defined conditions.
|CCD – Composite|
Column Design according to Eurocode 4 (ENV 1994-1-1).
|PURLIN SIZER – is a|
downloadable Excel spreadsheet file which uses the information from the
Cold Formed Lipped Channel spreadsheet to automatically size CFLC purlins.
Also, South African Steel Tables in Excel format.
TasDesign – Free timber beam design software for design to Australian
|Top1 NL design version|
4.21 – Dutch modern design & engineering tool for timber
structures. Optimizes a wide range of structure types, from simple beams
and purlins, through boomerang beams and portals. In glulam, sawn timber
or Kerto. German version available too. Free.
|Excel spreadsheets for geotechnical engineering|
from the Norwegian University of Science and Technology.
|BigSolve – German|
beam/frame analysis program.
|Free Office Software|
|Columbus – Free|
Document Management system from Arup.
|AVG 6.0 Anti-Virus|
System – Free Edition, AVG Resident Protection, AVG Email Scanner, AVG
On-Demand Scanner, Scheduled Tests, Free Virus Database Updates, Automatic Update feature,
Easy-To-Use Interface, Automatic Healing of infected files, AVG Virus
Vault for safe handling of infected files.
From the Imperial College server. Free for personal use. Click the following for more
a freeware program
you can use to easily track time spent on a project. It enables you to
time how long you spend on a task, including features that let you take
“slack time” for a phone call or break. Times for various tasks
can be linked to an hourly charge rate for accurate billing.
|ZipCentral is a|
free, robust and easy to use zip file manager with a lot of features.
Supports all common zip file actions plus creation of self-extracting
archives, drag and drop, disk spanning, shell execution, repairing damaged
archives and more. User interface similar to other popular shareware
|StarOffice™ software is a powerful, cross-platform office productivity suite — available free of charge — that delivers seamless access to applications and files.|
Includes spreadsheet software.
|Copernic 2000 is an intelligent agent that carries out your net-searches by simultaneously consulting the most important search engines of the Internet. Some 65 information sources are accessible with this version. Copernic 2000 is FREE.||*****||http://www.copernic.com|
|Go!Zilla – recover from download errors and resume failed downloads, manage and categorize files to download later and get those files from the most responsive site.|
Free unlimited, fully functional.
|Microsoft Word Viewer 97/2000 (Win95/98/NT)|
This free program lets you view and print not only MS Word 97/2000 documents, but
|Free PDF v0.95 Public Beta|
– Create your own PDFs files for free. Make professional looking, PDF Portable Document Format
viewable/printable with Adobe Acrobat Reader on any platform.
|Adobe® Acrobat® Reader™ is|
free software that lets you view and print Adobe Portable Document Format
|IrfanView is a very fast FREEWARE|
32-Bit graphic viewer for Windoze 9x, Windows NT and Windows 2000.
|602Pro PC Suite v2000b|
is an integrated office suite which includes four applications: a word processor, spreadsheet, graphics editor, and visual desktop.
|GNOME Office includes|
AbiWord, Gnumeric, GIMP, Dia, EOG, GNOME-PIM, and GNOME-DB. AbiWord is a word processor, Gnumeric is a spreadsheet application, the GIMP is an extremely powerful and versatile image editing program, Dia draws structured diagrams, Eye Of GNOME is an image viewer, GNOME-PIM is a personal information manager, and
GNOME-DB provides database connectivity.
|Grids was designed as a simple vectorial drawing software|
for Windows. Its principal functions are dedicated to schemes drawing, thus you can generate libraries with symbols which can be easily used (many symbols are provided with Grids). It can be used for networks schemes, for electrical schemes, for databases conception, flood charts,
etc. Grids is a free software.
|Drawme – a drawing|
program for Windows 3.1 This drawing program is freeware and is designed to provide a simple means for creating diagrams and illustrations to scale.
is a free comprehensive dictionary and thesaurus that works with several
word processors or as a stand alone program. The program has a large
database of more than 120,000 root words, 100,000 synonym sets and comes
with a template file so you can use it directly with Microsoft Word 6.0,
7.0, or 97.
|THE Thinking Man’s|
Thesaurus – includes a powerful thesaurus and a dictionary which can check the spelling of individual words as well as provide you with a list of similarly spelt words.
|Sicyon is a|
freeware all-in-one type of software consisting: expression calculator +
constants database + units converter + solver.
|Calc98 – is a|
pocket calculator simulator program for the Microsoft Windows operating
system. It is a replacement for the calculator program which is included
with the operating system, with many additional features and greater
flexibility. It is especially designed for scientific and engineering
users and includes a wide range of units conversions and scientific
|GraphTablet – With|
a simple, pushbutton interface you can create blank rectangular, polar, or
semilog graph paper on your home printer. Free.
- AASHTO – Automatic Dynamic Incremental Nonlinear Analysis
- ADINA – Automatic Dynamic Incremental Nonlinear Analysis
- American Iron and Steel Institute Bridge Software
- ANSYS – Structural analysis, heat transference, fluids dynamic, electromagnetics…
- Aprop1.01 – An “Integration by Area” method that allows the user to determine section Properties
- BAP2 – Beam Analysis Program
- BEST Center Software – A portfolio of bridge software including MERLIN-DASH
- BD3 – 3D Analysis and Design of Concrete Segmental Bridges
- BiAxialer – Analyze reinforced concrete cross-sections
- BOSS International – Civil and Environmental Software
- BRASS – Bridge Rating and Analysis of Structural Systems
- BRIDG for Windows – Bridge Rating and Interactive Display Graphics
- Bridge Designer II – 2D Analysis and Design of Concrete Segmental Bridges
- BRIGADE – A finite element program for bridge analysis
- CADRE – Finite Element Software
- CartéGraph Software Suite – Asset Management/GIS Software for the Public Works Industry
- Cbeam 2002 – Continuous beam software that allows the user to solve statically indeterminate beam structures
- cecBRIDGE -Automated Drafting Software Suite
- CivilFEM – makes the best civil engineering customization of the finite element program ANSYS
- CivilState – Bridge Analysis and Steel Girder Design Software
- CivilTech – Engineering, Architectural, and Educational Software
- Delta Structural Software – Delta Structural Analysis & Design Software
- Dr. Software, LLC – specializing in the development of structural modeling software for engineering and architectural professionals and students
- Eriksson Technologies – Bridge design software for AASHTO LRFD and Standard Specs
- EZ-Beam – Calculates shear and moment diagrams for continuous beams
- GaLa Reinforcement – General analysis of reinforced concrete elements
- gINT Geotechnical Software – a cost-effective solution for geotechnical and geoenvironmental professionals
- GRASP – Analysis of 2D frames and trusses
- GT STRUDL – Structural Analysis and Design Software for Civil Engineers
- InspectTech – Bridge Management and Inspection software with GIS
- Integer Software – Bridge design, analysis, assessment and load optimisation software
- KRTEK Software – BASSIG, IGird, Krbeam99, Krwall99, ConcWall, ConcBeam
- LARSA – Integrated Linear and Nonlinear FEA and Design Software
- LEAP – Bridge Design Software
- Logicsphere – Concrete Design Software
- LUSAS Bridge – Bridge Design, Analysis, and Assessment
- MC3D – Match-Casting Geometry Control for Pre-Stress Concrete Segmental Bridges
- MSC Nastran
- NAG – Numerical Algorithms Group
- NEi NASTRAN – Finite Element Analysis Engine
- Oasys – Structural and geotechnical analysis software
- OmniCon 98 – A Metric conversion program
- OPTI-MATE – Bridge design/rating software: straight/curved girder systems, trusses,and sign bridge structures.
- PGSuper – Precast-Prestressed Girder design and analysis software
- QConBridge – Live load analysis for the AASHTO LRFD Bridge Design Specification HL93 live load model
- RISA-2D, RISA-3D, RISAFOOT, RISABASE – Analysis and Design Software
- SAFI Quality Software, Inc. – Structural Engineering Software
- SAM for Bridge Engineering – Structural Analysis and Design Software for Bridges
- SAP90 – General Purpose Analysis and Design
- SecProp – Computes section properties of regular or irregular sections
- Sigma-X Section – Bridge and Structural Engineering Software
- Simple Beam – A framing member evaluation program for vertical and horizontal glazing components
- Simplified Bridge Solutions Ltd. – Bridge Analysis & Design Software
- SmartDraw – Engineering Drawing Software
- SOFiSTiK – Non-Linear FEA & Design for Prestressed and Post-Tesnioned Structures
- SOLVIA – Finite Element System
- SPE-MC – Seismic Performance Engineering – Moment Curvature Program
- STAAD.Pro – General Purpose Analysis and Design
- STLBRIDGE – Continuous Steel Bridge Analysis and Design
- Strand7 – Finite Element Analysis System
- STRAP – Software for the Structural, Civil, and Bridge Engineer
- Structural Software – Structural, Bridge, & Civil Software
- TK Solver – Math Modeling Software and Equation Solver for Engineering Applications
- UBC Elements – A windload evaluation program for Elements and Components
- VBent – Graphical Interface Pier/Bent Analysis Program
- VisualAnalysis – Frame & Finite Element Analysis Software